TUNED ZERO TRQ

$239.00

Clear
SKU: TNDPTR1.1-1 Categories: ,
Share this product

Description

SPEC DECK
Color-waySKUTorque
±0.5°
Tip dia.
±0.002” (±0.05mm)
Tip/par
±0.5″
Butt dia.
±0.005” (±0.12mm)
Butt par.
±0.5″
LengthWeight
±2g
Frequency
±5cpm (285g Tip weight)
Balance point Kick pointMaterialsConstruction 
Black TintTND-ZTRQ-34<0.9°.370” (9.40mm)4.00”.638” (16.20mm)11.00”34.00”118g430cpm56.00%Low Kevlar, 3k, T800CF, 30TFilament Wound, Vacuum Cured
Red KevlarTNDZTRQ34R<0.9°.370” (9.40mm)4.00”.638” (16.20mm)11.00”34.00”118g430cpm56.00%LowRed Kevlar, 3k, T800CF, 30TFilament Wound, Vacuum Cured
Black KevlarTNDZTRQ34B<0.9°.370” (9.40mm)4.00”.638” (16.20mm)11.00”34.00”118g430cpm56.00%LowBlack Kevlar, 3k, T800CF, 30TFilament Wound, Vacuum Cured

CPM Parameters:

SHAFT TYPEChuck WT.Clamp LengthClamp Pressure
Putter285g5.00”5kg cm²

Fitting

Color-wayEI Profile (Butt)EI Profile (Mid)EI Profile (Tip)Kick PointBalance profile (uncut) (Counter balanced)Balance profile (uncut) (Neutral)Balance profile (uncut) (Tip Balanced)Tempo FitRecovery ModePutter Design Compatibility Putter Build Length Parameter GuidelinesPutting Method / Arc Fit Grip Fitting Compatibility Installation (Butt Cut)Installation (Tip Cut)
Black TintFirm+FirmFirm+LowSlow-Mid-UpStable/SmoothStraight Neck Hosel, Slanted Neck Hosel, Plumbers Neck Hosel designs of ID .355”-.370”Playing lengths 32.00” – 36.00”Square to Square, Inside-Square-Inside, Inside-Square-SquareAll Conventinonal Standard, Midsize and Oversized putter grips.X
Red KevlarFirm+FirmFirm+LowSlow-Mid-UpStable/SmoothStraight Neck Hosel, Slanted Neck Hosel, Plumbers Neck Hosel designs of ID .355”-.370”Playing lengths 32.00” – 36.00”Square to Square, Inside-Square-Inside, Inside-Square-SquareAll Conventinonal Standard, Midsize and Oversized putter grips.X
Black KevlarFirm+FirmFirm+LowSlow-Mid-UpStable/SmoothStraight Neck Hosel, Slanted Neck Hosel, Plumbers Neck Hosel designs of ID .355”-.370”Playing lengths 32.00” – 36.00”Square to Square, Inside-Square-Inside, Inside-Square-SquareAll Conventinonal Standard, Midsize and Oversized putter grips.X

Technology

KINETIXXLoaded and TUNED…
Get TUNED with your putter to optimize putting.
TUNED putter shaft technology, is putting redefined!
TUNED 1.1 transforms every aspect of putting with the most advanced all-in-one engineered composite putter shaft performance system, ever!
TUNED 1.1 Built-in grip-less gripping technology, delivers the most enhanced feel and responsive feedback.
Our proprietary High-Tac aerospace polymer membrane allows the hands to become one, with the putter. Instantly improving alignment and precision.
The elongated parallel butt section of TUNED 1.1 is engineered and sized to replace all popular conventional and mid-sized grips.
Patent pending butt cap filter system TUNED to dampen and suppress unwanted vibrations, on the highest ratio order. Eliminating vibrations that disrupt the stroke and disconnect player from putter.
TUNED 1.1 delivers the first and only 0° torque playability factor with the highest shaft MOI for the greatest stability and purest kinetic energy transfer ever, from a putter!
KINETIXXLoaded TUNED 1.1 RED and BLUE putter shafts are now available at 33.00” raw length.
TUNED 1.1 BLUE features a balance point of 65% built-in counterbalance. Designed to fit and replace all standard length conventionally shafted putters with heavy weighted grip and or post production build parameter.
TUNED 1.1 RED features a balance point of 60% Designed to fit and replace all conventionally built putter shaft and grip build parameters.
TUNED 1.1 RED and BLUE putter shafts are compatible with all straight shaft tip configured / plumbers neck putter head designs.

Installation

Each model should be trimmed to length from the tip section only. This step should be completed first, Light belt sanding operation is recommended to prepare the tip section for epoxy. Do not chamfer or blade prepare tip.
Following the tip cutting and clean-up, complete the glueing and curing operations.
Once Club build operation is complete and the epoxy has cured, Insert the patent pending TPR butt cap damper first by hand. Press firm and push straight down to seat.
if necessary, cover or block the damper cap top with the box cap end, (to protect the butt cap and Aluminum Chip) then using a rubber hammer, one or two quick light taps will firmly seat the butt cap.
Do not glue in butt cap. It is designed for forced fit.
Cap assembly is the final step and should be completed once the build and curing operations are both complete.

Reviews

There are no reviews yet.

Be the first to review “TUNED ZERO TRQ”

Your email address will not be published. Required fields are marked *

four × one =